Home / Product Selection / Cameras / Shooting Images / AF (Autofocus) does not work (EOS REBEL T3i/EOS 600D)
  • Question

    AF (Autofocus) does not work (EOS REBEL T3i/EOS 600D)

    • Answer

    • Check the focus mode switch on the lens

      Autofocus will not operate if the focus mode switch on the lens is set to . 
      Set the focus mode switch on the lens to , as shown in the image below.

      Clean the lens and camera electrical contacts

      The transfer of information between the camera and the lens is carried out by the electrical contacts on both the camera and the lens.

      If the contacts on either the lens side or the camera side get dirty, communication cannot be carried out correctly, and in some cases the autofocus may not operate correctly. If the lens or camera contacts get dirty, please clean them very gently with a clean, dry cloth.


      ATTENTION

      Precautions on cleaning contacts:
      • Do not wipe the contacts with a wet cloth. It could cause malfunctions.
      • Do not touch the contacts directly with your hands. Touching them with your hands could cause corrosion, which would cause the camera to become inoperable.
      • When cleaning the contacts on the lens side, be careful not to damage the lens surface.
      • If the contacts are particularly dirty, please contact the nearest Canon Service Center.

      Securely mounting the lens

      Both the camera and the lens mutually exchange information. For this reason, if the lens is not securely mounted, there may be cases where the autofocus does not operate correctly. 
      Please mount the lens securely, as shown in the image below.

      How to Check the [C.Fn IV -9 Shutter/AE lock button] Custom Function Setting

      If autofocus does not operate when the shutter button is pressed halfway, the Custom Function setting may be changed as follows.

      In this case, by pressing the shutter button halfway, the camera is set to lock the AE (fix exposure).

      In this case, by pressing the shutter button halfway, the camera start to meter.

      In cases like these, change the value to other than 1 or 3. 
      Please see the Instruction Manual that is supplied with your camera for details about how to change the setting.

      If you have checked all of the items listed above, but there is still no improvement, please contact the nearest Canon Service Center. 
      Note that, if you are experiencing trouble with a lens made by another manufacturer, you should contact manufacturer of that lens instead.


    •  
    • View Answer at http://www.canon.co.uk/Support/Consumer_Products/products/cameras/Digital_SLR/EOS_600D.aspx?faqtcmuri=tcm:14-821636&page=1&type=faq
    •  
    •  
    • Not the answer you were looking for?
    •  
    • Click a problem area below for more Cameras solutions
    •  
    •  
    •  
    • Not sure where to start, try searching our site
    •  
    •  
ad_holder