Home / Product Selection / Internet / Set Up / How do I Install the Speedtouch 585v7 and 585v8 Wireless Router
  • Question

    How do I Install the Speedtouch 585v7 and 585v8 Wireless Router

    • Answer
    • This article only applies to ex-Tiscali customers who originally signed up with Tiscali, but have now joined us as TalkTalk members

      To enter the web admin for your 585 wireless router, open a browser window (Internet explorer or equivalent) and type 192.168.1.254 into the address bar or click here.

      This will open the Speedtouch web admin screen. If this screen does not open then you do not have an active connection to the router. If you are running in wired mode, ensure your Ethernet cable is connected to port 1 on the router. If you are running on a wireless connection, double check your wireless connection is connecting correctly, to prove the router is operational try connecting via a wired connection with the supplied RJ45 lead.

      If you are prompted for a Username and Password to login to the router and you do not know this information please see this answer for guidance.

      Image

      Click on Thomson Gateway from the menu.

      Image

      At the bottom of this screen is a section to Pick a task…

      Image

      From this menu select Set Up.

      This will open the Speedtouch Easy Setup Wizard.

      Image

      Click Next to start the wizard.

      The next screen will detail the settings for the broadband connection. The default service will setup the router correctly for you to access your broadband.

      Click the Next button to accept these settings.

      Enter your username and your password in the relevant areas.

      Then click the Next button.

      This will open the next screen detailing the settings you have entered that will be stored by the router.

      Review the details, if you find anything is incorrect click the back button and correct the information.
      The key elements to ensure are correct are the VPI/VCI, the connection type and that your username is correct.

      Once you are happy with the contents click the Start button.
      The setup wizard will now write those settings to the routers memory.

      Once this action has been completed the following screen will be displayed.

      Click Finish to complete the wizard.

      You should now be able to connect to the Internet.


    •  
    • View Answer at http://help.talktalk.co.uk/app/answers/detail/a_id/1311
    •  
    •  
    • Not the answer you were looking for?
    •  
    • Click a problem area below for more Internet solutions
    •  
    •  
    •  
    •  
    •  
ad_holder